Repairs to uPVC Windows
uPVC is an excellent choice for modern homes. They are long-lasting, durable and easy to maintain. As opposed to aluminium and timber they do not get rusty or decay.
It is crucial to wash and oil UPVC windows and doors on a regular basis. This will reduce costly repairs and improve energy efficiency.
1. Broken Glass
If the glass in your window is damaged, it can cause a huge amount of damage to your home, making it very hazardous and possibly fatal. It is essential to take the time to ensure that you're doing everything you can to keep your windows in good condition.
Single-pane windows are relatively easy to replace, and they will usually fit into the old frames very easily. However If you have double pane windows that are held in place by internal beading, it'll be more difficult to get rid of the existing panes and install new ones. In this situation, it is necessary to purchase plastic spacers to help the new pane fit into the window frame.
Wearing protective eyewear and thick gloves is a must when you are planning to remove the glass yourself. It is also recommended to lay down a dropcloth before you begin working on the window panes, so that any shards fall on the fabric and not onto the floor, where they could be trampled under.
It's a great idea seal the gap after the glass is removed. This will prevent drafts and water from getting into your property until a professional comes out to fix the window. It also acts as a barrier, deterring any intruders from gaining entry into your home. If the distance between the door and the window is significant, you may prefer security screens that includes a window. This will provide the best of both.
2. Sagging
uPVC is durable energy-efficient, cost-effective and economical alternative to timber sash windows. However, with time, they may be afflicted by a variety of problems including sagging. A sagging window can cause problems with light, draughts and even security. It's crucial to act as soon as you realize that your uPVC windows are sliding.
To repair a window that is sagging, you can try repositioning the hinges. To do this, you'll have to open the window so that you can get to the frame. You can then unscrew both the top and bottom hinges using a screwdriver and adjust them counter-clockwise or clockwise. Close your window to test the fit after you've repositioned your hinges. If you're satisfied with the fit of your window, you can tighten screws to hold them in the right position.
If you are unable to move the hinges, you might need to replace the seal. Rubber seals can dry out and lose their elasticity with time, causing them to loose their elasticity. If this happens, it's crucial to replace the seal as fast as possible to ensure your uPVC windows are waterproof and safe from drafts.
uPVC handles may also loosen up. Often, this is caused by screws that have come loose over time. However, it can occur because the handle mechanism has worn out. It's a good thing that it's simple to fix the handle of a window that is loose yourself. First, you'll need to close the window and do upvc windows repair an experiment fitting. The joints at the corners of the sash must align with the joint on the casing. If it isn't then you can use a screwdriver to loosen the handle and then turn the mechanism back into position.
3. Water Leaks
If you're waking up to wet floors and damp walls each time it rains, it's crucial to take action. The leaks of water from windows do are not just a cause for degrading of the structure of your home but also hamper your efforts to control the temperature in your home. Most often, uPVC window leaks are caused by damaged or missing sealant.
This is a simple fix that can be done by any DIYer who is competent. Depending on how severe the problem is, the old caulking may have to be removed. It is essential to remember that when it comes to uPVC window repairs you should not be tempted to 'over-caulk in order to make the area harder to clean and could reduce the efficiency of your energy.
It is essential to ensure that any drainage holes are free of debris and that the sill pan is angled properly so that it drains away from the window. In more serious cases, you may need to replace the window.
Other indicators of long-term water leakage are rotted sills and the appearance of black spots of mold on the walls near the window. This fungus thrives under humid conditions and can propagate quickly throughout the house.
It is also important to keep in mind that if the leak originates from the glass of your double-glazed windows it may be more likely to be a problem with the glass seal rather than the frame or sliding. Again this can easily be repaired by an uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.
4. Faulty Hinges
If your uPVC windows are difficult to open, or loose and open in a breeze It could be the hinges that are at the fault. Anyone who is a skilled DIYer can fix hinges in just a few minutes.
Like any mechanical part hinges are prone to be damaged over time. It's very simple to replace a double glazing window repairs hinge on a window however it is easier if someone helps you hold the frame.
Check that the uPVC hinges open and close in the proper direction. You can check this by looking for the arrow on each hinge, this indicates the direction in which the window should be opened.
The problem with the hinges on windows can be caused by incorrectly opening the window a certain way or due to poor installation at the factory. This can often be resolved by sending us a photo via our website and we will be happy to give you advice.
It is also important to grease the hinges on a regular basis. This can be accomplished by applying a light engineering oil to the hinges, we recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication will make the window easier to open and close. It can also reduce the risk of a window getting stuck and stop corrosion. This is recommended to be done at least once a year. WD40 and other solvent-based fluids are not recommended since they could damage parts of your uPVC window.
5. Draughts
Draughts can be caused by several different factors. The hinges can also become disaligned as a result of wear, which can cause an opening where the sash meets frame. If they are damaged beyond repair, it may be necessary to have them realigned. The second is the interlock, which is located on the hinge of the window, can also be misaligned, and again it may be possible to give them a thorough clean, however in some instances it could be necessary to get them replaced.
The second most frequent reason for draughts is window seals, these are prone to wear or damaged over time and let air escape through these gaps. This can be prevented by replacing them with high-quality weatherstripping. Replace the upvc windows with low-emissivity lenses. This will help regulate double glazed window repairs near me indoor temperatures, and reduce the risk of draughts.
Another, and most effective methods to reduce drafts is to use a draught excluder. These are usually fabric tubes which are filled with a kind of filler. They can be positioned on upvc window repair the windowsill on top. They can keep your home warm by blocking out cold air.
With a little maintenance and repairs windows made of upvc will repairmywindowsanddoors provide an excellent level of insulation and security for your home. However, it is important to realize that windows last for a certain period of time and eventually, they will reach the point when it's more efficient to replace them than fix them. If you encounter any issues with your Upvc window it is recommended to speak with a professional immediately.